Welcome to HengRun Composite Co., Limited
FRP
GRP Water Tanks
FRP Cooling Towers
FRP Tanks
a professional manufacturer of FRP tanks, GRP water tanks, FRP cooling tower

 

Round counter-flow  FRP cooling tower

Home
>>
Round counter-flow FRP cooling tower


All cooling towers are energy-saving, because the installment capacity of electric engine is lower in domestic and foreign similar products. In general, the water temperature in low noise and super low noise cooling power is 3~8℃, applicable for cooling air conditioning equipment and other equipment.
The super low noise cooling tower also utilizes a series of noise control measures on the basis of low noise tower, and the noise rating number at standard point is lower than that of corresponding low noise cooling tower by ~5dB(A). It is especially applicable for locations with stricter requirements for noise, for example, hotel, hospital, public building and location near residential area.
the water temperature decease of the industrial cooling tower, namely medium high temperature cooling power, is generally 10~25℃. A series measures, for example, increase in diameter of tower body, input air, wind pressure, efficiency, filler height, are added to it. It is applicable for cooling industrial water with high temperature decrease and its code is listed as follows, for example:
DBNL 3 -100 type:D-low noise;B-FRPN-counterflowL-cooling tower;3- third retrofit design;

100- nominal flux under standard work condition is100m 3 /h;

GBNL 3 -100 type:G- Industrial medium high temperature decrease;

CDBNL 3 -100 type:CD-super low noise;

DBNL 3 J-100 type:J-water accumulation model(in general, the water pond of water accumulation cooling tower is higher than of common model of cooling tower by 300~400mm )。

DBNL3W-100 type:W-non-water pond model.(The non-water pond model cooling tower means those without under tower body, which are applicable for installing on the top of water pool. Thus, the investment to equipment can be saved and the temperature effect can be increased.)                                                   

Round counter-flow FRP cooling tower 1 Round counter-flow FRP cooling tower 2 Round counter-flow FRP cooling tower 3

Round counter-flow
FRP cooling tower 1

Round counter-flow
FRP cooling tower
2

Round counter-flow
FRP cooling tower
3

     
Round counter-flow FRP cooling tower 4 Round counter-flow FRP cooling tower 5 Round counter-flow FRP cooling tower 6

Round counter-flow
FRP cooling tower
4

Round counter-flow
FRP cooling tower
5

Round counter-flow
FRP cooling tower
6

Related Content:

FRP cooling tower

FRP cross-flow cooling tower

Square counterflow FRP cooling tower

Round counter-flow FRP cooling tower

FRP cooling tower Select

FRP Cooling Tower Technical Details

products show
GRP water tanks
Stainless steel tanks
Galvanized Steel Water Tanks
Pipe Fittings
FRP Tanks
Cooling Tower Fills
FRP cooling tower
FRP cross-flow cooling tower
Square counterflow FRP cooling tower
Round counter-flow FRP cooling tower
FRP Fans
Enamel Coating Water Tanks
Molded FRP gratings
FRP lighting tile
 
 
 
  Copyright © 2004 HengRun Composite Co., Limited   a professional manufacturer of FRP tanks, GRP water tanks, FRP cooling tower...
Add: Fuqiang North Road, Zaoqiang County, 053100 Hebei ,China.  Tel:+86-318-8222061   Fax: +86-318-8235695
Mobile:+86-13931808425 E-mail:sales@frptanks.org   MSN: timzhifu@msn.com   URL:http://www.frptanks.org     E-mail login
Tim Yao