Welcome to HengRun Composite Co., Limited
FRP
GRP Water Tanks
FRP Cooling Towers
FRP Tanks
a professional manufacturer of FRP tanks, GRP water tanks, FRP cooling tower

 

GRP Water Tanks

Home
>>

GRP Water Tanks

HengRun Composite Co., Limitedoffers a full range of Hot press moulded panels. Designed&manufactured to Singapore Standards 245:1995 for world wide usage.

Hot press moulded panels

Hot press moulded panels


The water quality can meet the standard requirement of GB5749 Sanitary Standard for drinking.
The wide range of panels consist of 2mx1m, 1mx1m, 1mx0.5m and 0.5x0.5m sizes, in varying configurations for use     in side, bottom and top, which enables us to assemble。
Sealant
All joints&bolts are sealed with Synthetic Rubber materials.

Internal&External Reinforcements For all tanks over one meter high-extra reinforcements are required. Internal steel tie rods and  External  steel sections are Hot Dipped Galvanised as per standard.

Physical Properties:Will not corrode, Long Life,Normal fittings can be used, Light weight and extremely strong
The sectional range is further enhanced by the Pre-insulated panel.

GRP Tanks Fixings & Fastenings
All nuts/bolts and washers in contact with the water are of stainless steel . Non-immersed nuts, bolts and washers are either zinc plated , passivated or galvanised .

Supports For Panels
The panels shall be supported externally or internally by an adequate support system Elements of external supports  shall be hot dip galvanized. Interior supports shall be chemically resistant to the quality of stored water.

Ladders
A GRP sectional tank of 1.5m depth or more shall be provided with an internal ladder made up of terials same with the supports. The external ladders shall be galvanized mild steel or equivalent.

Manways & Inspection Hatches
Manways are bolted & vented which are in a standard size of: 600 x 600mm. They can be alternatively supplied hinged as a Deluxe Manway Inspection hatches 450 x 450mm are supplied standard with tank(s) holding over 1000 litres.

GRP water tanks 1 GRP water tanks 2 GRP water tanks 3

GRP water tanks 1

GRP water tanks 2

GRP water tanks 3

     
GRP water tanks 4 GRP water tanks 5 GRP water tanks 6

GRP water tanks 4

GRP water tanks 5

GRP water tanks 6


 

Hand lay-up tanks

Hand lay-up tanks

Maintenance Dividers
On request new sectional storage tank can have an internal maintenance divider fitted within the tank, allowing maintenance works to be carried out without disturbing the system.

Connections
A  comprehensive range of tank connections  are  available fot  site  fitting. Holes for connections may be cut with onventional tools. 

Overflow Screens
Each tank is supplied with a screen overflow having a micro mesh filter.

Capacity and Selection of Optimum Size Tanks:
GRP sectional Tanks can be assembled to various capacities From 1000 liters to 1 million liters by selecting the desired length and Width from 1m to 20m, and height of tank from 1m to 4m in increments of 0.5m, as rectangular or square tanks or to any special size.

DESIGN PARAMETERS FOR SECTIONAL TANK
Tank Depth (Mts)  Panel Safety    Factor
1.0   6
2.0   6
3.0   6
4.0    6
Wind Velocity 50meters/sec   220kg/m2


PANEL PHYSICAL PROPERTIES
Tensile Strength 60MPa
Flexural Strength 100MPa
bending modulus 7.0GPa
Barcol Hardness 60
Water Absorbtion 1.0%
Glass Content of glass-reinforced laminates 25%
Light transmission Nil
Outdoor weathering using Natural sunlight Stabilized
Toxicity Nil
Micro biological growth Nil


GRP TANK DIMENSION &CAPACITY(Liters)

DIMESSIONS HEIGHT
Length Width 1m 1.5m 2m 2.5m 3m  4m
1m 1m 1000  1500  2000 2500 3000 4000
2m 1m 2000 3000 4000 5000 6000 8000
3m 1m 3000 4500 6000 7500 9000 12000
4m 1m ;4000 6000 8000 10000 12000 16000
5m 1m 5000 7500 10000 12500 15000 20000
6m 1m 6000 9000 12000 15000 18000 24000
2m  2m 4000 6000 8000  10000 12000 16000
3m 2m 6000 9000 12000 15000 18000 24000
4m 2m 8000 12000 16000 20000 24000 32000
5m 2m 10000 15000 20000 25000 30000 40000
6m 2m 12000 18000 24000 30000 36000 48000
3m 3m 9000 13500 18000 225000 27000 36000
4m 3m 12000 18000  24000  30000 36000 48000
5m 3m  15000 22500 30000 37500 45000 60000
6m 3m  18000 27000 36000 45000 54000 72000
4m 4m 16000 24000 32000 40000 48000 64000
5m 4m 20000 30000 40000 50000 60000 80000
6m 4m 24000 36000 48000 60000 72000 96000
5m 5m 25000 37500 50000 62500 75000 100000
6m 5m 30000 45000 60000 75000 90000 120000
7m 6m 42000 63000 84000 105000 126000 168000
8m 6m 48000 72000 96000 120000 144000 192000
9m 6m 54000 81000 108000 135000 162000 216000
                             
products show
GRP water tanks
Stainless steel tanks
Galvanized Steel Water Tanks
Pipe Fittings
FRP Tanks
Cooling Tower Fills
FRP cooling tower
FRP cross-flow cooling tower
Square counterflow FRP cooling tower
Round counter-flow FRP cooling tower
FRP Fans
Enamel Coating Water Tanks
Molded FRP gratings
FRP lighting tile
 
 
 
  Copyright © 2004 HengRun Composite Co., Limited   a professional manufacturer of FRP tanks, GRP water tanks, FRP cooling tower...
Add: Fuqiang North Road, Zaoqiang County, 053100 Hebei ,China.  Tel:+86-318-8222061   Fax: +86-318-8235695
Mobile:+86-13931808425 E-mail:sales@frptanks.org   MSN: timzhifu@msn.com   URL:http://www.frptanks.org     E-mail login
Tim Yao